This setting controls how quickly the laser begins to run away from your pet. In other words, it changes how far away your pet has to be from the laser for it to begin moving. Felik will automatically adjust to animals of different size, so the responsiveness can be thought of as a "difficulty" setting.


Low Responsiveness Tips


Low responsiveness is great for young pets (puppies & kittens). As your pet becomes more skilled, you may want to increase the responsiveness to provide them with a new challenge.



High Responsiveness Tips


Large dogs and active adult cats will enjoy a higher responsiveness settings. This allows the laser to be far enough ahead to allow for a full-speed chase. 


We recommend increasing the responsiveness value if you notice your pet stumbling due to believing they caught the red dot. This means the laser is not moving away fast enough from your pet for them to enjoy a chase at their full speed.


Using Buttons


To change the Responsiveness setting using the hardware buttons, do the following:

  1. OR 
    Ensure Felik is not activated and the laser is off. The status light should be purple or off, depending on your settings.

  2. Enter Settings Mode

    Hold the right button until the status light turns yellow.

  3. Switch Setting

    Click the right button to select the Responsiveness setting. The status light will turn green.

  4. Check Current Setting

    Long press the left button to check the current setting. The light will blink from 1 to 5 times, where:

    • 1 blink = Lowest setting
    • 5 blinks = Highest setting

  5. Change Setting

    Click the left button to adjust the Responsiveness level. Depending on the setting, the light will blink from 1 to 5 times.

  6. Save & Exit
    OR 
    Hold the right button to exit the Settings Mode.