Factory reset will restore all settings to factory defaults, wipe any and all configuration, and reset the Wi-Fi settings.
Use this option for troubleshooting, if you forgot your passcode, or if you can't connect to Felik via the mobile app.
Using Buttons
To perform the reset, follow the steps below:
OR
Ensure Felik is not activated and the laser is off. The status light should be purple or off, depending on your settings.Enter Settings Mode
Hold the right button until the status light turns yellow.Switch Setting
Click the right button several times to cycle through settings until the status light turns red.Initiate Reset
Hold the left button to initiate the reset. Once the status light begins to rapidly blink, release the button.Confirm Reset
Press & hold the left button until the device beeps and the status light turns off or remains a solid yellow. Felik will take about a minute to reboo to factory defaults , and once finished the status light should turn a solid magenta color.
Felik will now reboot with factory settings.
If you are using using the mobile app, go to your mobile device's Wi-Fi Settings and look for a network called Felik_xxxx (where xxxx is a collection of numbers and letters).
After connecting to Felik's Wi-Fi hotspot, you can use the mobile app to pair with and configure Felik again.