This section of the documentation explores using the buttons to turn the Wi-Fi radio on and off, as well as reset the Wi-Fi settings.


Toggle Wi-Fi Radio

Turning the Wi-Fi OFF means your Felik will not emit a personal Wi-Fi hotspot, nor will it be able to connect to any Wi-Fi networks.

Turning the Wi-Fi ON means your Felik will try to connect to the previously connected Wi-Fi network. If unable to do so, Felik will emit a personal hotspot.


If you do not plan to connect your Felik to your home Wi-Fi network, and you don't want to connect to it using the mobile app, we recommend that you turn the Wi-Fi hotspot functionality OFF using the procedure described below.


Reset Wi-Fi Settings

Sometimes you may need to completely reset Felik's Wi-Fi settings. This will return the Wi-Fi to the factory defaults, and Felik will emit a Wi-Fi hotspot.


Using Buttons

To change Wi-Fi settings, perform the following steps:

  1. OR Ensure Felik is not activated and the laser is off. The status light should be purple or off, depending on your settings.

  2. Enter Settings Mode
    Hold the right button until the status light turns yellow.

  3. Switch Setting
    Click the right button four times (x4) to select the Wi-Fi setting. The status light will turn blue.

  4. Select Wi-Fi Mode
    Click the left button to toggle between possible Wi-Fi modes. The light will blink either once, twice, or continuously indicating the selected option: 

    • 1 blink = turn Wi-Fi OFF
    • 2 blinks = turn Wi-Fi ON
    • Continuous blinking = RESET Wi-Fi

  5. Apply Current Setting
    Long-press the left button until you hear a beep. This will apply the currently selected Wi-Fi setting.

  6. Exit Settings Mode
    OR Hold the right button to exit the Settings Mode.