NOTE 1: replacing the SD card does not void your device warranty
NOTE 2: replacement SD card must be Class 10 or above, 4GB minimum
To replace a failed SD card, please follow the steps below:
1. Remove the top cover by following the instructions in this linked article.
2. Undo the 4 inner screws holding the mechanism to the bottom enclosure housing
3. Take the mechanism out of the enclosure by carefully lifting on the USB cable in the back
4. The SD card is located on the left side of the device (when looking straight at the camera)
5. To release the SD card, push on it with your thumb and it will pop out like so
6. Insert the replacement SD card.
7. Re-insert the mechanism into the bottom enclosure and tighten the 4 screws from Step 2.
8. Re-install the top cover by following the instructions in this linked article <-- click link for video